fin condenser ( fin type condenser )

Raw material

  Rolling welded steel tube: ? 4.76 ∼ ? 6.35 ×0.71 ,  Low carbon steel wire O.D1.4 ∼ 1.6mm  Bracket: steel plate(SPCC) thickness 0.6 ∼ 2.0Steel plate : SPCC thickness 0.6 ∼ 0.8

Structure

  Flat type of wire on tube condenser used at the back;  Bended or spiral type of wire on tube condenser used at the bottom;  Wrapped type of tube embed on plate

Key process

Tube Bending, Welding, Fix the bracket, Weld the suction tube, Leakage test, Cleaning, Coating, (Folding or bending to shape), Inspection, Packing

Technical standards

Wire pitch ≥ 5 Can produce according to the drawing or sample supplied by clients, also can help the clients design and produce different condensers.

Performance

  Surface with electrophoresis coating to prevent the corrosion.  Inner cleanness can meet the requirement of R134a & CFC cooling system  Can satisfy the cooling capability requirements.

Capacity

2.5 million sets per year (8000 sets per day)

Residual moisture

≤ 5 /100cm3

Residual impurity

≤ 10 /100cm3

Residual mineral oil

≤ 100 /100cm3

Residual chlorine

≤ 5vloppm

Residual paraffin

≤ 3 /

Biggest single impurity

≤ 0.5mm

Coating thickness

  thickness of Anodic electrophoresis coating 18 ∼ 22 μ m;

  thickness of cathodic electrophoresis coating 15 ∼ 20 μ m;

Hardness of coating

≥ 2H

Impact of coating

50cm?kg/cm impact, no crack

Adhesion of coating

≥two grade

Flexibility of coating

Around R=3D bend 180?, no crack or no fall off

Color tolerance of powder painting

E ≤ 1.5

Corrosion resistant(salt spray GB2423)

  Anodic electrophoresis coating ≥24h;  Cathodic electrophoresis coating ≥72h;